Inverter el tape 220V + flashing function
By buying this product you can collect up to
1
point
.
Your cart will total 1
point that can be converted into a voucher of
€0.30.
This inverter is capable of supporting 4m of 1cm-wide el tape, or 2m of 2cm-wide tape. It also features an adjustable flashing mode.
Inverter 220 volts for el tape:
This inverter special el tape allows you to power up to 4m of el tape 1cm wide, or 2m of el tape 2cm wide. It connects directly to the mains.
The inverter is specifically adapted to strip lights that operate on the electroluminescence principle. By raising the frequency of the current from 50-60 Hertz to several hundred or even several thousand Hertz, light is created along the entire length of the el tape and over 360 degrees.
The advantages of electroluminescent lighting:
The el tape electroluminescent lighting emits no heat and adapts to your every need. It consumes 30 to 50% less energy than LEDs, 60 to 80% less than light bulbs and 90 to 99% less than conventional neon.
- Constant light over the entire length and 360 degrees
- No heat generation
- Very low power consumption (0.5 watts per meter)
- Flexible and highly resistant
- Waterproof
The cut parts are reusable, you just need to re-solder a connector.
Technical data from the inverter for el tape:
| Supported length of el tape: |
|
| Inverter: | 220 volts mains |
| Dimensions : | 70 mm x 45 mm x 45 mm |
| Functions : | ON / OFF / FLASHING |
Data sheet
- Inverter
- 220V
