El tape blue 1m retail
No reward points for this product.
This blue el tape is ready to be connected to the inverter of your choice. The el wire band is 1m long and 1cm wide.
El tape 1-meter blue :
This el tape blue retailer is ready to connect to the inverter of your choice. It comes complete with itsinverter connector. Ready to use, all you have to do is choose the inverter to suit your needs.
Choose from several inverters for strip lights:
- Battery-powered, for up to 2m of 1cm-wide el tape
- 12 volts, for up to 4m of el tape 1cm wide or 2m of el tape 2cm wide
- 220 volts, powering up to 4m of 1cm-wide el tape or 2m of 2cm-wide el tape.
They are specifically designed for strip lighting. The operating principle is based on raising the frequency of the current. This increases from 50-60 Hertz to several hundred or even several thousand Hertz.
You can power several strips with a single inverter:
The cut parts are reusable, you just need to re-solder a connector.
The advantages of electroluminescent lighting:
The el tape electroluminescent lighting emits no heat and adapts to your every need. It consumes 30 to 50% less than an LED, 60 to 80% less than a light bulb and 90 to 99% less than conventional neon.
- Constant light over the entire length and 360 degrees
- No heat generation
- Very low power consumption (0.5 watts per meter)
- Flexible and highly resistant
- Waterproof
Technical data:
Length : | 1 meter |
Color : | blue |
Width : | 1 centimetre |
Power consumption : | 0.5 watts per meter |
Data sheet
- Color
- Blue
- Length
- 1m