Inverter 12V up to 10m from el wire
No reward points for this product.
This special inverter for bendable el wire allows you to power up to 10m of el wire. It connects directly to a 12-volt wiring harness or battery.
Inverter 12 volts :
This special inverter bendable el wire allows you to power up to 10m of neon. It connects directly to a 12-volt wiring harness or battery.
The inverter is specifically adapted to light wires that operate on the electroluminescence principle. By raising the frequency of the current from 50-60 Hertz to several hundred or even several thousand Hertz, light is created along the entire length of the el wire 360 degrees.
Of course, you have the choice of feeding either one bendable el wire of 5m or several light wires of other lengths, whatever their diameter or color. Remember to buy a multiple connector if you want to feed several neon lights. These multiple connectors, for flexible light wires, are available in the Bendable el wire accessories category.
The advantages of electroluminescent lighting :
The el wire emits no heat and adapts to your every need. Consumes 30 to 50% less energy than LEDs, 60 to 80% less than light bulbs and 90 to 99% less than conventional neon.
- Constant light over the entire length and 360 degrees
- The el wire gives off no heat
- Very low power consumption (0.5 watts per meter)
- Flexible and highly resistant
- Waterproof, the el wire water-resistant
- Cuttableyou can cut the bendable el wire wherever you like
The cut parts are reusable, you just need to re-solder a connector or connect them directly to the inverter. You'll find a connection kit in the Bendable el wire accessories category and a tutorial entitled How to cut and connect an electroluminescent el wire in the Tutorials category
You can easily adapt el wire to any surface. Simply stick it on with simple glue or plastic silicone, tape, attach, sew or simply let it run along a shape.
Technical data from the inverter:
Supported length of el wire: | 10 meters |
Inverter: | 12 Volts |
Dimensions: | 54 mm x 33 mm x 29 mm |
Functions : | ON on power-up |
WARNING! The red wire connects to + and the black wire to -
Data sheet
- Inverter
- 12V