Inverter 12V auto sound sensor up to 5m sewable el wire
No reward points for this product.
This special inverter for sewable el wire allows you to power up to 5m of el wire. It features a sound sensor and connects directly to your car's cigarette-lighter socket.
Inverter 12 volts :
This inverter special sewable el wire allows you to power up to 5m of neon. It is equipped with a special cigarette-lighter plug and a sound sensor.
So you can connect this inverter directly to your car's cigarette lighter. If you don't have one, simply cut the connector and connect the wires from the inverter directly to the + 12 volts on your wiring harness. Warning! The red wire connects to the + and the black wire to the -
You have a sound sensor that reacts to the rhythm of the music and the sound of your voice. Sensitivity is adjustable. Effect guaranteed!
The inverter is specifically adapted to collared luminous wires that operate on the principle of electroluminescence. By raising the frequency of the current from 50-60 Hertz to several hundred or even several thousand Hertz, light is created along the entire length of the el wire 360 degrees.
Of course, you have the choice of feeding either a 5m sewable el wire or several 2m light wires, regardless of color. Remember to buy a multiple connector if you want to feed several light wires. These multiple connectors, for luminous and flexible wires, are available in the Accessoiries category.
The advantages of sewable el wire:
This el wirealso known as el wire or el wire, has a special feature. It features a plastic collar. This allows you to attach it easily by stapling, gluing or sewing. So you can easily adapt it to all kinds of surfaces.
The sewable el wire emits no heat and adapts to your every need. It consumes 30 to 50% less than an LED, 60 to 80% less than a light bulb and 90 to 99% less than a conventional neon.
- Easy mounting thanks to plastic collar
- Full-length, 360-degree continuous light
- Can be cut with a simple pair of scissors
- No heat generation
- Waterproof for outdoor use
- Flexible and highly resistant
The cut parts are reusable, you just need to re-solder a connector or connect them directly to the inverter. You'll find a connection kit in the Accessoiries category and a tutorial entitled How to cut and connect a el wire electroluminescent? in the Tutorials category
Technical data from the inverter:
| Supported length : | 5 meters |
| Inverter: | 12 volts via cigarette lighter socket |
| Dimensions: | 20 mm diameter by 80 mm length |
| Sound transducer dimensions : | 65 mm x 50 mm x 22 mm |
| Functions : | ON / OFF / sound sensor |
Data sheet
- Inverter
- 12V sound sensor