Inverter 12V auto sound sensor up to 5m el wire

Inverter 12 volts :

This inverter special el wire allows you to power up to 5m of neon. It is equipped with a special cigarette-lighter plug and a sound sensor.

So you can connect this inverter directly to your car's cigarette lighter. If you don't have one, simply cut the connector and connect the wires from the inverter directly to the + 12 volts on your wiring harness. Warning! The red wire connects to the + and the black wire to the -

You have a sound sensor that reacts to the rhythm of the music and the sound of your voice. Sensitivity is adjustable. Effect guaranteed!

The inverter is specifically adapted to el wires which operate on the electroluminescence principle. By raising the frequency of the current, from 50-60 Hertz to several hundred or even several thousand Hertz, light is created along the entire length of the bright neon LED 360 degrees.

Of course, you can choose to feed either a 5m el wire or several el wires of other lengths, whatever their diameter or color. Remember to use a multiple connector if you need to feed more than 2 el wires. These multiple connectors for light wires are available in the El wire accessories category.

The advantages of electroluminescent lighting :

The el wire emits no heat and adapts to your every need. Consumes 30 to 50% less energy than LEDs, 60 to 80% less than light bulbs and 90 to 99% less than conventional neon.

• Constant light over the entire length and 360 degrees
• Does not heat up
• Very low power consumption (0.5 watts per meter)
• Flexible and highly resistant
• Waterproof
• Can be cut with a simple pair of scissors

The cut parts are reusable, you just need to re-solder a connector or connect them directly to the inverter. You'll find a connection kit in the El wire accessories category and a tutorial entitled How to cut and connect a el wire electroluminescent? in the Tutorials category

You can easily adapt el wire to any surface. Simply stick it on with simple glue or plastic silicone, tape, attach, sew or simply let it run along a shape.

Technical data from the inverter: