Inverter 220V up to 50m from el wire + flashing function

Inverter 220 volts flashing function:

This inverter special bendable el wire allows you to power up to 50m of neon. It connects directly to the 220-volt mains supply.

It also features a multi-flash mode. With a single button, you can switch from OFF mode to ON mode to flashing mode. When in flashing mode, simply keep your finger pressed down to change its frequency.

The inverter is specifically adapted to light wires operating on the electroluminescence principle. By raising the frequency of the current, from 50-60 Hertz to several hundred or even several thousand Hertz, light is created along the entire length of the wire el wire 360 degrees.

Of course, you have the choice of feeding either a 50m bendable el wire or several light wires of different lengths, regardless of their diameter or color. Remember to buy a multiple connector if you need to feed more than 2 light wires. These multiple connectors, for luminous and flexible wires, are available in the Bendable el wire accessories category.

The advantages of electroluminescent lighting :

The el wire emits no heat and adapts to your every need. Consumes 30 to 50% less energy than LEDs, 60 to 80% less than light bulbs and 90 to 99% less than conventional neon.

• Constant light over the entire length and 360 degrees
• The el wire gives off no heat
• Very low power consumption (0.5 watts per meter)
• El wireflexible and highly resistant
• Waterproof
• Cuttableyou can cut the bendable el wire wherever you like

The cut parts are reusable, you just need to re-solder a connector or connect them directly to the inverter. You'll find a connection kit in the Bendable el wire accessories category and a tutorial entitled How to cut and connect an electroluminescent el wire in the Tutorials category

You can easily adapt el wire to any surface. Simply stick it on with simple glue or plastic silicone, tape, attach, sew or simply let it run along a shape.

Technical data from the inverter: