0
0 Cart (empty)
Inverter 220V - 10m from el wire flexible + flashing function

Inverter 220V up to 10m from el wire + flashing function

€9.90 Tax included

By buying this product you can collect up to 1 point points. Your cart will total 1 point that can be converted into a voucher of €0.30.

This special inverter for el wire allows you to power up to 10m of el wire. It also features an adjustable flashing mode. It connects directly to the 220-volt mains supply.

Reference
ALIE00011
In stock (53 Items)

Inverter 220 volts flashing function:

This inverter special el wire allows you to power up to 10m of neon. It connects directly to the 220-volt mains supply.

It also features a multi-flash mode. With a single button, you can switch from OFF mode to ON mode to flashing mode. When in flashing mode, simply keep your finger pressed down to change its frequency.

The inverter is specifically adapted to el wires which operate on the electroluminescence principle. By raising the frequency of the current from 50-60 Hertz to several hundred or even several thousand Hertz, light is created along the entire length of the luminaire bright neon LED 360 degrees.

Of course, you can choose to feed either a 10m el wire or several el wires of other lengths, whatever their diameter or color. Remember to buy a multiple connector if you need to feed more than 2 el wires. These multiple connectors are available in the El wire accessories category.

The advantages of electroluminescent lighting :

The el wire emits no heat and adapts to your every need. Consumes 30 to 50% less energy than LEDs, 60 to 80% less than light bulbs and 90 to 99% less than conventional neon.

  • Constant light over the entire length and 360 degrees
  • Does not heat up
  • Very low power consumption (0.5 watts per meter)
  • Flexible and highly resistant
  • Waterproof
  • Can be cut with a simple pair of scissors

The cut parts are reusable, you just need to re-solder a connector or connect them directly to the inverter. You'll find a connection kit in the El wire accessories category and a tutorial entitled How to cut and connect a el wire electroluminescent? in the Tutorials category

You can easily adapt el wire to any surface. Simply stick it on with simple glue or plastic silicone, tape, attach, sew or simply let it run along a shape.

Technical data from the inverter:

Supported length :10 meters
Inverter:220 volts mains
Dimensions:108 mm x 55 mm x 32 mm
Functions :ON / OFF / ADJUSTABLE FLASHING

Data sheet

Inverter
220V